PN40TC1 - BIG PAD LCD Touchscreen Display - Sharp Extensive IT
Sharp PN40TC1 Interactive Whiteboards Learning

PN40TC1 BIG PAD LCD Touchscreen Display

  • New 40″ Huddle Board interactive touch screen monitor
  • Ultra smooth capacitive touch technology
  • 10 point touch recognition
  • Touch-operated onscreen menu
  • Minimised glare and fingerprints
  • Mount for web camera
  • Landscape, portrait, or horizontal (face-up) orientation
  • Bundled stand for desktop set-up (landscape orientation)
  • 16-hour daily operation
  • Bundled software includes: SHARP Pen Software, SHARP Display Connect, SHARP Touch Viewer
  • Compatibility with Crestron Connected software
  • MFP connectivity

Intuitive touchscreen operation, whether with a finger or pen, facilitates active collaborations and a lively exchange of opinions.

Screen40-inch widescreen(100.33 cm diagonal) TFT LCD
Max.Resolution1,920 x 1,080 pixels
Max. Display Colours16.77 million colours (approx)
Pixel Pitch (H x V)0.45735 x 0.4494 mm
Max. Brightness (average)300 cd/m2
Contrast Ratio5,000 : 1
Viewing Angle (H/V)178°/ 178°(CR ≧ 10)
Active Screen Area878.1 x 485.3 mm
Response Time9.5 ms (gray to gray, avg)
BacklightLED, edge lit
Touch TechnologyProjected Capacitive Touch
Multi Touch10 points
PC Connection PortUSB 2.0 (type B) x 1
Power SupplySupplied from main unit
DriverOS: Windows® 7, 8.0, 8.1,10. Mac OS X V 10.6 – V10.13 (Intel processor)
Protection Glass ThicknessThickness: Approx 2.5 mm, Shock resistance: 130 cm
CommunicationPassive stylus included
VideoHDMI™, DisplayPort™ Analogue RGB
SynchronisationHorizontal/vertical separation (TTL: positive/negative)
Plug & PlayVESA DDC2B
Power ManagementVESA DPMS
Display Port™1
Component Video
PC Analogue mini D-sub 15 pin1
Video BNC
Component BNC
RCA pin (L/R)
Audio (3.5mm stereo mini jack)1
With OptionsPN-ZB03H : HDBaseT™ x 1, or, PN-ZB03W : LAN x 1 (10Base-T/100Base-TX), Wireless adapter x 1 (USB 2.0)
RCA pin(L/R)
3.5mm mini stereo jack1
Digital Audio Output (Optical)
OptionsUSB 2.0 (Type A) x 2 works as hub for PC via USB Type B touch input
Built-in10 W + 10 W
MountingVESA (4 points), 200 x 200 mm pitch, M6 screw
Power Supply100V – 240V AC, 50/60 Hz
Power Consumption89 W
Dimensions (W x D x H) (approx, display only)939 x 65 x 546 mm
Weight17.5 kg
Operating Temperature5ºC to 35ºC
Operating Humidity20% to 80% RH (No condensation)
Main accessoriesAC power cord, remote control unit, battery (AAA size) x 2, set-up manual, cable clamp x 3, camera mount, USB cable, logo sticker, pen tray, touch pen, CD-ROM, portrait installation operation label, desktop stand, SHARP Display Connect license x 1

*DisplayPort and the DisplayPort Compliance Logo are trademarks owned by the Video Electronics Standards Association in the US and other countries. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.

Business Products Warranty Statement

This Sharp product is warranted against faults in material and manufacture for the period as stated in the table below.

In the event of any defect arising in the equipment during the warranty period, such repairs should only be carried out by the Dealer from which the unit was originally purchased or a Service Centre approved by Sharp to service this type of equipment These repairs would be carried out at no charge to the owner, subject to the conditions specified herein.

This warranty does not extend to defects or injuries caused by or resulting from causes not attributable to faulty parts or the manufacture of the product, including but not limited to, defect or injury caused by or resulting from misuse, abuse, neglect, lack of maintenance, accidental damage, improper voltage, liquid spillage, vermin infestation, software, or any alterations made to the product which are not authorised by Sharp.

Please retain your sales documentation, as this should be produced to validate a warranty claim. This warranty is in addition to and in no way limits, varies or excludes any implied rights and remedies under any relevant legislation in the country of sale.

This warranty does not cover transportation to and from the Sharp Approved Service Centre. Goods presented for repair may be replaced by refurbished goods of the same type rather than being repaired. Refurbished parts may be used to repair the goods. The repair of your goods may result in the loss of user generated data, please ensure that you have saved this data elsewhere prior to repair.

Australian customers: Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. The criteria of a major failure is defined in the Australian Consumer Law. Should you require any assistance with a major failure please contact Sharp Customer Care.

Data Projector24 months (excluding lamps and air filters)
Copier / Printer6 months
Electronic Cash Registers12 months
Facsimile12 months
Information Display Panel36 months
POS Terminals12 months
AL Copier12 months
Calculator12 months
Personal Organiser12 months

IMPORTANT NOTICE: This warranty applies to products sold in Australia & New Zealand

Previous ArticleNext Article